Xtester-ETCR2100A+ Clamp Earth Resistance Tester is our company's technology research and development team on technical quality of the pursuit of excellence, through continuous innovation to improve, upgrade with the old product. Its performance is mainly reflected in:
Breakthrough in self-test the boot a long time to waiting, start immediately into the test.
Breakthrough relay self-test mode, using the most advanced processing algorithms and digital integration technology.
Breakthrough the old product too heavy issues, more in line with characteristics of hand-held devices.
New design, panel operation with 6 buttons, better performance.
Increase sound and light alarm function, with "beep-beep-beep” alarm sound.
Increase the interference signal recognition indicator function, with "beep-beep-beep” indicator.
Measurement range: 0.01Ω-1200Ω
Stored data 99 Units. Lower power consumption, Maximum operating current less than 50mA.
Xtester-ETCR2100A+ Clamp Earth Resistance Tester is widely used in the grounding resistance measurement of the power, telecommunications, meteorology, oilfield, construction and the industrial and electrical equipment. In the measurement of a grounding system with loop, does not require breaking down the grounding down lead, and no need the auxiliary electrode. It is safe, fast and simple in use. The tester can measure ground faults which cannot be measured by traditional methods. It can be used in applications where traditional methods cannot be measured, because the Xtester-ETCR series clamp grounding resistance meter measures the combined value of grounding body resistance and grounding lead resistance.
Warranty card/Qualification card
Measurement Range & Accuracy
6VDC 4 PCS of LR6 lkaline batteries
4 Digits LCD display, Screen: 47mm×28.5mm
Automatically power off after 5 minutes without any operation
≤50mA, Continuously working for 30 hours
-20oC~60oC, below 90%rh
Alarm Threshold Setting Range
Audible and Visible Alarm
“Beep-beep-beep” alarm sound, alarm symbol flashing, press AL key to turn on/off and setting
Interference Signal Recognition
“Beep-beep-beep” indicator, NOISE symbol blinking
External Magnetic Field
External Electrical Field
Single Measure Time
Resistance Measure Frequency
Measured Current Frequency
Low Battery Voltage indication
When the battery voltage is lower than 5.3V, the low battery voltage symbol is displayed
Storage Full Indication
Storage data full of 99 sets,flashed display "MEM" symbol