Contact Us For Quotation | Email: 464560351@qq.com | Whatsapp&Wechat:+8618620373879 |
Xtester-VD07D,VD07E Intelligent Non-contact electric voltage tester, voltage test pen,Induction Test Pencil Voltmeter
Characteristic
Non-contact test |
Judge electricity wire line |
Distinguish the neutral line |
Shows the intensity of the radiation |
Sound and light alert |
Safe and reliable |
Can induce strong electric field radiation |
Break point detect |
LED lighting function, easy to work in dark environment |
Pen clip design, easy to carry |
Auto power off function |
Technology features
● AC voltage detection, High/low sensitivity, Flashlight, Auto power off . |
● Voltage test range: High sensitivity, 12~1000V ,Low sensitivity, 48~1000V. |
● Safety Compliance: CAT III 1000V or CAT IV 600V, IP54. |
● Battery life: 6 hours continuous use,stand by time up to 1.5 years. |
● Alarm mode: different frequency of sound and different color of led lamp. |
● Showing electric field intensity:the more LED lights lit, the stronger the electric field intensity. |
Description
Power supply: 1.5V AAA 2pcs |
Product size:140x26x20mm |
Product weight: about 40g |
● Press the power key quickly, Buzzer beeps, Power indicator lights up and entered the test state. When the power on, power key was pressed again and the buzzer turned to shut down and power off. |
● When the power is on, the low sensitivity test state is defaults. |
● The sensitivity / flashlight key (less than 1 second) can be switched at high and low sensitivity. |
● When the sensitivity indicator light is lit, it is a highly sensitive test state. Low sensitivity test state when extinguished. |
● Press the sensitivity / flashlight key and hold for more than 2 seconds. The flashlight is on; The flashlight is off by pressing the sensitivity / flashlight key and holding for more than 2 seconds |
● The voltage detector probe is placed near the AC voltage. When the detector is induced, the signal light will be on. |
● If the electric field signal becomes stronger, the signal light that indicates the field strength will be lit step by step. |
● After about 5 minutes without any operation and No signal detection, the voltage detector will be automatically off to extend the battery life. |
● When the battery voltage drops to less than 2.3 volts, the voltage detector will be off automatically, please replace the battery. |