English
| Contact Us for Quotation | Email：464560351@qq.com | Whatsapp: +8618620373879 |
Introduction
| Xtester-NTF Series:Special purpose models feature large rollers to minimize bending of materials likefiberoptics, carbon and technical fibers .The Xtester-NTF series has 5 kinds of tension ranging from1.0-200.0cN to 25-2500.0 |
Features
1. The patented technology automatically resets the meter to zero , which improves the measurement accuracy and facilitates measurement. 2. Equipped with a wire diameter compensator, which compensates erors caused by different wire diameters and improves measurement accuracy 3. Equipped with lead frame and guide wheel movement structure, it is easy to capture the tested material. 4. V-groove aluminum measuring guide roller with ball bearing. 5. Rugged, non-slip aluminum case, resistant to electrical interference. 6. LIPO lithium-ion polymer battery (about 60 hours of continuous operation). 7. nesiesed mtesa .te guderclex an th scren are octed on th same plane. During the tet the tetdata,the status of the guide roller and the tested material can be seen. 8. A maximum of 10 materials can be accurately calibrated. With the wire diameter compensator the tested wire diameter range is larger. 9. character menu setting interface, easy to operate. 10. According to different ranges and needs, the measurement value display unit can be selected g, kg, c N, N, daN, lb 11. It can record the maximum value minimum value,peak value and average value in the measurement process and can also store 10 independent measurement values. 12. Pogrammable setting of the maximum and minimum value of the trend staus bar, cearly detemine the range of tension change, and have the advantages of mechanical instrumernt trend display. 13. Provides fine adjustmern of display results. If there is a slight deviaton betwee the material measured on site and the standrd caliraton material, and accuate values can be displayed without recalibration. 14. Function settings can be protected by passwords to improve setting security. 15. Betten tensiometer provides two display modes, taking into account the advantages of accurate electronic tensiometer reading and mechanicl tensiometer rend display. |
Model Xtester-NTF
| Model | Tension range | Measuring head width | Diameter range | Calibration materials (Polyamide Monofilament) | wire diameter compensation |
| Xtester-NTF-200 | 2.0-200.0cN | 140mm | 0.05-0.15mm | φ0.12mm | YES |
| Xtester-NTF-500 | 5.0-500.0cN | 140mm | 0.05-0.2mm | φ0.12mm+φ0.2mm | YES |
| Xtester-NTF-1000 | 10-1000 cN | 140mm | 0.1-0.5mm | φ0.2mm+φ0.4mm | YES |
| Xtester-NTF-2000 | 20-2000 cN | 140mm | 0.3-0.7mm | φ0.4mm+φ0.7mm | YES |
| Xtester-NTF-2500 | 25-2500 cN | 140mm | 0.3-0.7mm | φ0.4mm+φ0.7mm | YES |
Specifications
| Accuracy | (factory calibration material)1% full scale (FS),(other materials)3% FS. |
| Display update frequency | 0.5 seconds |
| Optional units | gf, cN,N, kgf, daN, LB(switchable units are different for different ranges) |
| Adjustable range | The displayed value can be adjusted within ± 10 steps of 1% of full scale according to the site requirements |
| Line speed | 6000m / min |
| Stored value | Maximum, minimum, maximum peak, minimum peak, average |
| Display | Dot-matrix LCD |
| Shell size | 76 ×46×275mm |
| Power | Lithium-ion rechargeable battery, continuous working for about 60 hours |
| Operating temperature | 10-45°C, 90% relative humidity or less |
