Xtester-PT710-A (300kHz,100A) Current Probe

2023-07-13 13:48:09

Battery and adaptor power supply. Including MT-246N(BNC to banana interface),use for DMM measuring.

Main Features :
Serial No. :

Specification

Email: mewoi008@mewoi.com

Whatsapp:+8619928420370

Xtester-PT710-A (300kHz,100A) Current Probe

INTRODUCTION

Xtester-PT710-A

- Quick, safe and simple AC/DC current measurement.

- Adopts the Hall effect principle to measure 1400A DC and 1400A AC peak; It is suitable for power measurement and can measure RMS value in the case of DC interference.
- Standard BNC interface, can be customized multimeter dedicated interface.
- There are two power supply modes: battery powered by microcomputer control after 10 minutes of automatic shutdown, adaptor power supply without automatic shutdown function.

Technical Specification

Model	Xtester-PT710-A
Bandwidth	DC-300kHz
Measurement	DC：100A； AC：200Ap-p； RMS：70A
Conversion ratio	10mV/A，100mV/A
Measuring wirediameter	≤11mmΦ
Sensitivity/oscilloscope show 1mV	10mA
Rise Time	1.2 μs
Measurement accuracy	±3%: 50mA~10Apeak at 100mV/A ±4%:500mA~40Apeak at 10mV/A ±15%: 40A~100Apeak at 10mV/A
Working voltage	300V CAT III
Max.floating voltage	600V CAT II
Size	2807032 mm

Selection Guide

Model	Xtester-PT-740	Xtester-PT740-1A	Xtester-PT740-2A	Xtester-PT740-3A
Range Peak	0.2A-30A \| 30A-300A	0.2A-40A \| 40A-400A	0.2A-60A \| 60A-600A	0.2A-140A \| 140A-1400A
Range DC	0.4A-30A \| 30A-300A	0.4A-40A \| 40A-400A	0.4A-60A \| 60A-600A	0.4A-140A \| 140A-1400A
Output signal ratio	10mV/A(100:1)\|1mV/A(1000:1)	10mV/A(100:1)\|1mV/A(1000:1)	10mV/A(100:1)\|1mV/A(1000:1)	10mV/A(100:1)\|1mV/A(1000:1)
Accuracy	1.5%±5mV
Noise	1mV rms
Rise/Fall time	2.3us
Reference conditions	18℃-28℃, 20-75%RH, sinusoidal frequency 48Hz-65Hz, external magnetic field < 40A/m, no DC component, no AC carrier nearby, central test sample, load impedance ≥1MΩ and ≤100pF, DC-65Hz before measurement reset to 0, battery 9V±0.1V
Bandwidth	DC-150kHz(-3dB)
Load impedance	≥1MΩand≤100pF
Input impedence	When 50Hz, 0.39MΩ, When 1000Hz, 58MΩ
Working Voltage	The lagrest 600V rms
Influence of adjacent conductors	When 50Hz, ＜10mA/A
Influence of the Position of the jaw conductor	0.5% reading
Battery/Battery life	9V alkaline battery/approx. 50 hours
(Battery capacity indication) (Overload indicator)	When ＞6.5V，Green LED light (Red LED light is overload indicator)
Automatic shutdown time	10min
DC zero adjustment	√
Jaw size insert conductor	1 cable: diameter 30mm; 2 cables: 24mm diameter or 2x 31.5x 10mm bus cable
Size/Weight/Color	224x97x44mm/440g/ Dark grey box :; Red frontal orifice
Output	Line length 2M,BNC interface, can be customized multimeter dedicated interface
Temperature and humidity	0-50C / 20-75% RH

Lable: (300kHz,100A) Current Probe

Xtester-PT710-A (300kHz,100A) Current Probe

Xtester-PT710-A (300kHz,100A) Current Probe

INTRODUCTION

Technical Specification

Selection Guide

Recommended