English
| Contact Us for Quotation | Email：464560351@qq.com | Whatsapp: +8618620373879 |
Product introduction
Xtester-ETCR001F flexible coil current sensor (with integrator) is a separate integrator. The sensor is composed of an integrator and a coil. The separate integrator can be combined with FA and FB coils flexibly and conveniently. There is no exposed metal conductor in the coil part, non-contact measurement, safe and reliable; its small size, light weight, beautiful appearance, soft and flexible, suitable for narrow environments and places with dense wiring; response frequency bandwidth (0.1Hz-1MHz), users Coil lengths can be customized upon request. The flexible coil is the differential of current to time. The integrator integrates the output voltage signal (0~1V) to truly restore the measured current and output a complete signal waveform. The measured current range can range from 1 ampere to tens of thousands of amperes. Mainly used for detection of current, high-order harmonic current (up to 400 times), complex waveform current, transient impact current, phase, electric energy, power, power factor, etc. Equipped with an integrator, it can be more conveniently integrated into other test equipment, such as power quality analyzers, harmonic analyzers, power parameter recorders, phase detection analyzers, industrial control devices, oscilloscopes, high-precision digital multimeters, transient Shock recorder, distributed measurement system, protection system, etc. |
Technical parameter
1. Range and accuracy
| Range | resolution | Accuracy class | phase error |
| AC 0A～3000A | 1A | ±1%FS | ≤1° |
| AC 0A～6000A | 2a | ±1%FS | ≤1° |
| AC 0A～10000A | 3A | ±1%FS | ≤1° |
Note: 50Hz/60Hz; 23℃±2℃, below 70%RH, the wire is at the center of the coil
2. Other parameters
| function | AC current, high-order harmonic current, complex waveform current, transient impact current, starting current, phase, electric energy, power, work rate factor detection |
| power supply | Zinc-manganese dry battery 6F22 9VDC (can be connected to an external power supply) |
| Range | AC 0A～3000A/6000/10000A (optional) |
| signal output | Full scale corresponds to output AC 0～1V |
| Output Interface | 3.5mm audio frequency plug/BNC interface/tap (optional) |
| output line length | 2m |
| Electric field interference | No hysteresis effect, no external electric field interference |
| wire position | The wire to be tested is in the center of the coil, and the influence of position error is ≤±0.5%FS |
| current frequency | 45Hz～70Hz (measured current frequency) |
| response frequency | 0.1Hz～1MHz |
| line voltage | Line test below AC 600V |
| quality | 205g |
| Integrator size | 103mm×65mm×26mm |
| Working temperature and humidity | -20℃～50℃; below 80%rh |
| storage temperature and humidity | -10℃～60℃; below 70%rh |
| Dielectric strength | AC 2000V/rms (both ends after the coil is unlocked and unfolded) |
| Suitable for safety regulations | CAT IV 500V 、CAT Ⅲ1000V |
| Coil model | Coil inner diameter | coil length | Coil quality | Coil diameter |
| Xtester-ETCR50FA | Φ50mm | 160mm | 80g | Φ7.5mm |
| Xtester-ETCR100FA | Φ100mm | 320mm | 90g | |
| Xtester-ETCR150FA | Φ150mm | 480mm | 100g | |
| Xtester-ETCR200FA | Φ200mm | 640mm | 110g | |
| Xtester-ETCR300FA | Φ300mm | 950mm | 132g | |
| Xtester-ETCR500FA | Φ500mm | 1580mm | 170g | |
| Xtester-ETCR1000FA | Φ1000mm | 3150mm | 290g | |
| Xtester-ETCR1500FA | Φ1500mm | 4720mm | 390g | |
| Xtester-ETCR200FB | Φ200mm | 640mm | 212g | Φ12mm |
| Xtester-ETCR300FB | Φ300mm | 950mm | 274g | |
| Xtester-ETCR500FB | Φ500mm | 640mm | 400g | |
| Xtester-ETCR1000FB | Φ1000mm | 3150mm | 715g | |
| Xtester-ETCR2000FB | Φ2000mm | 6300mm | 1340g | |
| Xtester-ETCR3000FB | Φ3000mm | 9420mm | 1970g |
