English
| Contact Us for Quotation | Email：464560351@qq.com | Whatsapp: +8618620373879 |
Product Introduction
Xtester-ETCR-FA series flexible coil current sensor is composed of a coil and a handle. The coil part does not have any exposed metal conductors, non-contact measurement, safe and reliable; its small size, light weight, beautiful appearance, soft and flexible, suitable for narrow environments and dense wiring The place; wide measurement range, high precision, strong reliability, wide response frequency (0.1Hz-1MHz), users can customize the coil length according to their needs. Using advanced Rogowski coil technology, it is a toroidal coil wound evenly on non-ferromagnetic materials, without hysteresis effect, almost zero phase error, no magnetic saturation phenomenon, and extremely high linearity. The output signal is the differential of the current with respect to time. By integrating the output voltage signal, the input current can be truly restored. The measured current range can range from milliamps to tens of thousands of amperes. It is mainly used for the detection of AC leakage current, large current, high-order harmonic current (up to 400 times), complex waveform current, transient impact current, phase, electric energy, power, power factor, etc. With an integrator, it is easy to integrate into other equipment, such as phase detection analyzers, industrial control devices, data recorders, oscilloscopes, harmonic analyzers, power quality analyzers, high-precision digital multimeters, transient impact recorders, distributed Measuring systems, protection systems, etc. |
Technical parameter
| Function | AC leakage current, large current, higher harmonic current , complex waveform current, transient impact current, phase, electric energy, power, power factor detection |
| Detection method | Flexible coil CT: The output signal is the differential of current versus time, and it can be truly restored by integrating the output voltage signal Input Current |
| Coil diameter | Φ7.5mm |
| Range | 0A～10000A～higher |
| resolution | 10mA |
| Accuracy class | ±1.0%FS (50Hz/60Hz; 23℃±2℃, below 70%RH, the wire is at the center of the coil) |
| phase error | ≤0.1°(50Hz/60Hz；23℃±2℃) |
| Output Interface | 3.5mm audio frequency plug/BNC plug/tap (optional), cable length 2M |
| Electric field interference | No hysteresis effect, no external electric field interference |
| wire position | The wire to be tested is at the center of the coil, and the influence of position error is ≤ ±0.3%FS |
| response frequency | 0.1Hz～1MHz |
| line voltage | Line test below AC 1000V |
| Working temperature and humidity | -20℃～50℃; below 80%rh |
| storage temperature and humidity | -10℃～60℃; below 70%rh |
| Dielectric strength | AC 2000V/rms (both ends after the coil is unlocked and unfolded) |
| Suitable for safety regulations | CAT IV 500V 、CAT Ⅲ 1000V |
Model Comparison
| Coil model | Coil inner diameter | coil length | Coil quality | Coil diameter |
| Xtester-ETCR50FA | Φ50mm | 160mm | 80 g | Φ7.5mm |
| Xtester-ETCR100FA | Φ100mm | 320mm | 90g | |
| Xtester-ETCR150FA | Φ150mm | 480mm | 100g | |
| Xtester-ETCR200FA | Φ200mm | 640mm | 110g | |
| Xtester-ETCR300FA | Φ300mm | 950mm | 132g | |
| Xtester-ETCR500FA | Φ500mm | 1580mm | 170g | |
| Xtester-ETCR1000FA | Φ1000mm | 3150mm | 290g | |
| Xtester-ETCR1500FA | Φ1500mm | 4720mm | 390g | |
| Xtester-ETCR200FB | Φ200mm | 640mm | 212g | Φ12mm |
| Xtester-ETCR300FB | Φ300mm | 950mm | 274g | |
| Xtester-ETCR500FB | Φ500mm | 640mm | 400g | |
| Xtester-ETCR1000FB | Φ1000mm | 3150mm | 715g | |
| Xtester-ETCR2000FB | Φ2000mm | 6300mm | 1340g | |
| Xtester-ETCR3000FB | Φ3000mm | 9420mm | 1970g |
