English
| Contact Us For Quotation | Email: 464560351@qq.com | Whatsapp&Wechat:+8618620373879 |
Xtester-TD2200 series high performance digital control 19 "standard rack-mounted high voltage power supply,600W/50kV/12mA
Overview
| Xtester-TD2200 series is a high performance 19 "standard rack-mounted high voltage power supply. Operating with digital control, which can meet the functional requirements of customers' various control settings. The nanosecond arc protection response ability ensures the power supply to run without faults, and the built-in PFC circuit makes the power factor reach more than 0.99. Air natural convection cooling is adopted to dissipate heat. This series of products have complete functions, wide input and output range, and can also add the functions that customers need to customize through software. |
Typical Application
| Ion implantation, Electrostatic spraying, Ion beam power supply, Electron beam power supply, Accelerator power supply, Hi-POT test, High voltage capacitor charging and discharging, other scientific research, etc. |
FEATURES
1,Soft Switching 2,Output Voltage 1kV-100kV 3,Output Power 600W 4,Digitally Programmable 5,Nanosecond Protection Response 6,Over-Voltage 7,Over-Current 8,Short Circuit And Arc Protection 9,RS-485 Isolated Digital Communication 10,Secure Interlocking Function 11,Built-in Active PFC 12,Low Ripple 0.1% VP-P (Optional) |
PRODUCT SPECIFICATIONS
Input | AC220V ± 10%, 50/60 Hz, max 16A. |
Output | Maximum output voltages could be designed from 1kV to 100kV, and the maximum output power is 600W. 0 to the highest voltage is continuously adjustable, and the output is positive or negative single polarity. |
| Voltage control | Local control The power supply comes with a rotary encoder to set the output voltage between 0 and the highest voltage. External analog control The external 0 to 10V control signal can adjust the output from 0 to the highest output voltage. Digital communication control Through RS-485 communication interface, the output can be adjusted from 0 to the highest voltage according to the standard Modbus communication protocol. |
| Current control | Local control The power supply comes with a rotary encoder to set the output current between 0 and the highest current. External analog control The external 0 to 10V control signal can adjust the output from 0 to the maximum current. Digital communication control Through RS-485 communication interface, the output can be adjusted from 0 to the maximum current according to the standard Modbus communication protocol. |
| Front Panel Status Indication | high-voltage on/off, voltage or current mode, output positive or negative single polarity, over-voltage, over-current, over-temperature, arc protection, memory, reset, actual value, set value, protection value, custom function key status indication, error code display function. |
| Voltage regulation | Load 0.01% of output voltage no load to full load. Line 0.01% for 10% change in input voltage. |
| Current regulation | Load 0.01% of output current from 0 to rated voltage. Line 0.01% for 10% change in input voltage. |
| Ripple Voltage | Less than 1%p-p under rated output (0.1% optional). |
operational | 0 ℃ to + 50 ℃. Storage |
Temperature coefficient | 0.01% per ℃. |
Stability | less than 0.1% every 8 hours after 1/2 hour warm-up. |
Voltage and current indication | four-bit LED nixie tube, with accuracy of 1% under rated output conditions. |
Overall dimensions | 482mm wide, 88mm high and 320mm deep. |
Connector | Recessed plastic insulated conduit and probed high voltage cable are connected by metal connector with diameter of 16mm/28mm. The standard high voltage cable is 2 meters long. |
Weight | About 10kg. |
