China Testing Instruments Manufacturer,Whatsapp/Wechat:+8618620373879  Email: 464560351@qq.com

Xtester-MK-WD905 probe water dissolved oxygen sensor
Xtester-MK-WD905 probe water dissolved oxygen sensor
Xtester-MK-WD905 probe water dissolved oxygen sensor
Xtester-MK-WD905 probe water dissolved oxygen sensor
Xtester-MK-WD905 probe water dissolved oxygen sensor
Xtester-MK-WD905 probe water dissolved oxygen sensor
Xtester-MK-WD905 probe water dissolved oxygen sensor
Xtester-MK-WD905 probe water dissolved oxygen sensor

Xtester-MK-WD905 probe water dissolved oxygen sensor

2024-07-25 15:59:43  

Xtester-MK-WD905 probe water dissolved oxygen sensor

  • Main Features :
  • Serial No. : Lisa0673
Contact Us For QuotationEmail:  464560351@qq.comWhatsapp&Wechat:+8618620373879

Xtester-ETCR2100A+Clamp Earth tester,Clamp gound resistance tester,earth clamp meter,earth loop tester,ohm meter clamp

overview

1. The Optical Dissolved Oxygen technology is based on luminescent optical technology. The Optical Dissolved Oxygen sensor is
approved by the ASTM International Method D888-05. 2. Without calibration requirements and thanks to an ultra low power
technology, the Optical Dissolved Oxygen sensor meets the demands of field works and short or long term campaigns. 3. Without
oxygen consumption, this technology allows you an accurate measure in all situation and especially in very low oxygen
concentrations

Features

Measure principle
Optical measure by luminescence
Measure ranges
0.00 to 20.00 mg/L
0.00 to 20.00 ppm
0-200%
Resolution
0.01
Accuracy
+/- 0.1mg/L
+/- 0.1 ppm
+/- 1 %
Response time
90% of the value in less than 60 seconds
Frequency of recommended measure
>5 s
Water move
No necessary move
Temperature compensation
Via NTC
Stocking temperature
- 10°C to + 60°C
Signal interface
Modbus RS-485 (standard) and SDI-12 (option)
Sensor power-supply
5 to 12 volts
Consumption
Standby 25 µA
Average RS485 (1 measure/ seconde) : 4.4 mA
Average SDI12 (1 measure/ seconde) : 7.3 mA
Current pulse : 100 mA
Dimensions
Diameter : 25 mm ; length : 146 mm
Weight
Stainless steel version 450g (sensor + cable 3 m)
Titanium version 300 g (sensor + cable 3 m)
Material
Stainless steel 316L, New : body in Titanium
Maximum pressure
5 bars
Connection
9 armoured connectors, polyurethane jacket, bare
wires or waterproof Fisher connector
Protection
IP68

Key attributes

Place of Origin
Guangzhou, China
Warranty
12 months
Customized support
OEM
Brand Name
Xteater
Measure ranges
0,00 to 20,00 mg/L
Resolution
0,01
Accuracy
+/- 0,1mg/L
Sensor power-supply
5 to 12 volts
Material
Stainless steel 316L, New body in Titanium
Protection
IP68
Consumption
Standby 25 uA
Stocking temperature
- 10°C to + 60°C


Telephone
Email
Map
QQ Chat