English
| Contact Us For Quotation | Email: 464560351@qq.com | Whatsapp&Wechat:+8618620373879 |
Xtester-GK-4 Automatic photoelectric correction controller
Introduction
| GK-4 series photoelectric deviation correction controller has the advantages of small volume and convenient installation. It can correct the deviation of all kinds of coils, such as reel paper film, metal foil, non-woven cloth, weaving cloth and so on. According to the different printing patterns of the rectifying material, we can choose the following edge and following line mode, and freely set the single electric eye or double electric eye detection, and the deviation correcting executive motor is the permanent magnet low speed synchronous motor. According to their own requirements, the user can choose the ball wire rod or ordinary screw, so that the deviation correction drive stroke and the offset of the coil have a strict proportional relationship. Mainly used in printing and packaging, papermaking, film, textile and other industries need to control the edge of the occasion. |
Characteristic
Built-in intelligent single-chip microcomputer control |
| can provide one-eye or double-eye deviation correction |
| Follow the line and follow the edge to determine |
| Provide external control interface |
Technology features
| response time | ≤50ms |
| Deviation correction accuracy | Optometry depends on the eye |
| output power | 50-500W |
| detection mode | Check the edge, follow the line. |
| control method | Single electric eye |
| External switch | Automatic/ manual switch, left/ right turn switch |
| Annex (selection) | Photoelectric eye, synchronous motor, ball wire rod |
| Appearance size | 96×96×100(mm)(Width × height × depth) |
| installation size | 92×92×90(mm)(Width × height × depth) |
| working voltage | AC220V±15% 50Hz |
