English
| Contact Us for Quotation | Email: mewoi008@mewoi.com | Whatsapp:+8619928420370 |
Xtester-DP270 (70MHZ,1300Vp-p)differential probe
INTRODUCTION
Xtester-DP-270 - Two-stage attenuator switch for easier selection. - Special for high horsepower, maximum measuring voltage up to 2600Vp-p.- Can be used with any brand oscilloscope. - Power adapter. - Use standard oscilloscope USB slot to access 5V DC power supply. | ||
Technical Specification
Model | Xtester-DP-270 |
Bandwidth(-3dB) | DC-70MHz |
Accuracy | ±2% |
Attenuation ratio | X50/X500 |
Rise time | 5ns |
Voltage Input Ranges(DC+ Peak AC) | ±1300V@500(1838Vrms) ±130V@50(183Vrms) |
Permitted Max. Input voltage | Max differential voltage:±1300V(DC+ACpeak) |
Max voltage between each input terminal and ground | 919Vrms |
Input Impedance | 5MΩ//2pF each side to ground |
Output voltage | ≤±2.6V |
Output impedance | 50Ω(for 1 MΩ input oscilloscope) |
Rejection Rate on common mode | 60Hz:>80dB/100Hz:>60dB/1MHz:>50dB |
5 MHZ Limit Bandwidth | Switchable: Full / 5MHz |
Power supply | External 5 V DC (USB Input) |
consumption | 300mA |
Weight | 285g |
Dimension (L×W×H) | 175x68x28mm |
Selection Guide
| Model | Xtester-DP-235 | Xtester-DP-270 | Xtester-DP-210 |
| Bandwidth | DC-35MHz(-3dB) | DC-70MHz(-3dB) | DC-100MHz(-3dB) |
| Rise time | 10ns | 5ns | 3.5ns |
| Attenuation Ratio | x50,x500 | ||
| Accuracy | ±2%（Heat engine in 20 minutes） | ||
| Input voltage range | x50≤260V x500≤2600V | ||
| Input AC Vp-p | 2600Vp-p | ||
| Input DC Voltage | 1300V | ||
| Input terminal and ground terminal maximum voltage | 919Vrms | ||
| Output voltage | ±2.6V | ||
| Noise suppression ration | 60Hz：＞80dB/100Hz：＞60dB/1MHz：＞50dB | ||
| Input impedance | 10MΩ/1pF | ||
| Output impedance | 50Ω | ||
| 5MHz limited bandwidth | Switchable: Full/5MHz | ||
| Power | Specify an external 5V DC power supply | ||
| Max.conumption | 300mA | ||
| Dimension(LxWxH) | 175x68x28mm | ||
| Weight | 285g | ||
